Car care products
It is more than 125 years since Castrol was founded and we have consistently pioneered the development of lubricants, oils and fluids to keep the world moving on land, sea and air. Millions of customers and thousands of mechanics across the globe trust Castrol products to look after and protect their engines.
Castrol has been trusted inside engines for over 125 years. Now you can trust Castrol’s full Car Care range.
A vehicle may look spotless from the outside. But out of sight, deposits of oil, dirt, grease and carbon can build up and become problematic.
The Castrol Car Care Range is designed to clean and protect critical vehicle components that support safe and problem free driving.
For drivers – Use of the products is a sure sign that their vehicle is in good hands.
For mechanics – Its use enhances their ability to offer the highest quality maintenance to deepen customer loyalty and creates an opportunity to increase bill value through the introduction of this new product range.
To purchase our new Car Care Range contact one of our Distributor partners.
Castrol Brake Cleaner
Low volatility, non-staining brake cleaner
Metallic parts degreaser and brake cleaner in an aerosol spray for workshop use. Has a hydrocarbon and IPA-based formulation that is free from chlorinated or halogenated hydrocarbons.
Application: Helps remove dirt, oil, greases and residues from metallic parts and brakes during car service, repair and maintenance.
Directions for use:
1. Check plastic and paint compatibility before use.
2. Spray cleaner onto the parts and leave to work for a short period.
Refer to the safety data sheet before use. Product must be used in accordance with instructions
Castrol DPF Cleaner
Can help restore diesel particulate filter performance
Aerosol diesel particulate filter (DPF) cleaning spray for workshop use.
Application: Helps restore diesel particulate filter (DPF) performance without the need for dismantling the DPF or specialist tools.
Directions for use:
1. Remove temperature and/or pressure sensors on the exhaust pipe.
2. Spray the product into the holes created directing the nozzle towards the DPF.
3. Reassemble exhaust and conduct a test drive for a minimum of 20 minutes.
4. If no regeneration has occurred a manual / forced regeneration may be necessary.
Refer to the safety data sheet before use. Product must be used in accordance with instructions
Castrol Radiator Cleaner
Cleans car radiator and heating systems
Liquid car radiator and system cleaner.
Application: For cleaning car radiators and heating systems to help improve reduced radiator performance, cleaning after engine repairs or cleaning prior to a coolant change.
Directions for use:
1. Application: For cleaning car radiators and heating systems to help improve reduced radiator performance, cleaning after engine repairs or cleaning prior to a coolant change.
2. Directions for use:
3. Remove used coolant.
4. Fill the heating system with clean water, adding the radiator cleaner.
5. Leave the engine running at operating temperature for around 30 minutes.
6. Remove water/cleaner mix.
7. Wash out the system with clean water and drain.
8. For stubborn deposits, repeat procedure.
9. Refill the system with fresh recommended coolant for your vehicle.
10. Bleed air and check system sealing.
Refer to the safety data sheet before use. Product must be used in accordance with instructions.
Castrol Multipurpose Spray
5 in 1 multipurpose spray
Multi-Purpose aerosol spray for rust loosening, parts lubrication, contact cleaning, dewatering and corrosion prevention for workshop use.
Application: Lubricates hinges, locks and other moving parts. Penetrates and loosens rusted parts. Protects metals and electrical components from moisture and corrosion. Can be used as a contact cleaner. Penetrates greasy and oily residues to clean parts.
Directions for use:
1. Clean surface if necessary.
2. Spray on hinges, locks and other moving parts from approximately 20 cm away.
Refer to the safety data sheet before use. Product must be used in accordance with instructions.
Castrol Rust Remover
Excellent rust penetration and rust loosening
Rust loosening penetrant spray with additional lubricating and corrosion prevention properties for workshop use.
Application: Helps to free parts that have seized from corrosion.
Removes rust from vehicles, tools and other metal surfaces.
Anti-corrosion
and lubricating properties help to protect metal surfaces from rusting and wear.
Directions for use:
1. Spray onto seized or rusted parts and allow to penetrate for a short period before loosening.
2 .Repeat if necessary.
Refer to the safety data sheet before use. Product must be used in accordance with instructions.
Castrol Silicone Spray
Lubricates a wide variety of moving parts
Silicone lubricant aerosol spray for workshop use.
Application: Workshop spray used for the lubrication of a wide variety of moving parts, including metals and plastics. Silicone spray can also be used as a moisture repellent to help protect rubber parts, such as trim and seals.
Directions for use:
1 .Clean surface if necessary.
2. Spray on hinges, locks and other moving parts from approximately 20 cm away.
Refer to the safety data sheet before use. Product must be used in accordance with instructions.
