Manual transmission fluids
Castrol offers a wide range of manual transmission fluids, from fully synthetics which can cover the needs of the latest transmissions to high quality minerals for use in older high mileage cars.
Manual transmission fluids
The manual transmission fluid plays an extremely important role to the proper operation of your transmission as it will keep it lubricated and protected from heat and wear. If the wrong fluid or one in a deteriorated condition is in use the transmission will most likely experience problems such as gear stiffness, gear tooth wear and eventually, parts damage.
Castrol’s manual transmission fluids help your transmission stay well protected and help you avoid unexpected repairs which can be very expensive.
Always consult your car’s handbook to make sure you find the correct fluid for your transmission.
Available in the following grades:
Castrol Syntrans FE 75W
Full synthetic transmission fluid recommended for most passenger car conventional manual and "dry clutch" transmissions where API GL-4 lubricants are required.
Meets or exceeds industry standards:
- API GL-4
- MB-Approval 235.73
- Meets Ford WSS-M2C200-D2
Castrol Syntrans V FE 75w-80
Full synthetic transmission fluid with fuel efficiency benefits suitable for transaxles, manual gearboxes, transfer boxes and final drives where an API GL-4 lubricant is specified.
Meets or exceeds industry standards:
- API GL-4+
- Audi TL 52532
Castrol Syntrans B 75w
Full synthetic fluid approved for use in BMW passenger cars and highly stressed inline manual transmissions.
Meets or exceeds industry standards:
- API GL-4
- ZF TE-ML 11
Castrol Syntrans Multivehicle 75w-90
Full synthetic transmission fluid recommended for most passenger car manual transmissions.
Meets or exceeds industry standards:
- API GL-4
- MB-Approval 235.72
- Meets Ford WSD-M2C200-C
Castrol Syntrans Transaxle 75w-90
Full synthetic fluid suitable for use in transaxles, manual gearboxes, transfer boxes and final drives where an API GL-4 is required.
Meets or exceeds industry standards:
- API GL-4+
- VW 501 50SAE Class according to J306 pre 1998
Castrol Manual EP 80w-90
For applications where API GL-4 performance is required.
Meets or exceeds industry standards:
- API GL-4
- MAN 341 Z2
- ZF TE-ML 02B, 17A