CASTROL TRIBOL WIND
Adaptive protection for equipment reliability
More than 60% of all mechanical failures are lubrication related, the majority of which are caused by wear and surface degradation.
Advanced industrial lubricants containing active molecules that adjust to the operating conditions to protect components, reduce wear and unplanned failures.
Castrol Tribol grease is based on highly refined mineral oils, providing adaptive protection for equipment reliability.
Designed for long-term lubrication under the most difficult operating conditions.
Castrol Tribol grease range with MicrofluxTrans Plastic Deformation (MFT-PD) technology provides outstanding resistance to surface fatigue, pitting, spalling and scuffing. MFT-PD creates a protective film before friction occurs, which then actively diffuses into exposed metal surfaces under severe load to create a micro-smoothing layer.
Castrol Tribol
Discover why Castrol Tribol GR SW 460-1 is a lubricant designed to meet the many challenges faced by wind turbines in tough environmental conditions.
Castrol Tribol SW 460-1 and 680-1
Castrol Tribol GR SW 460-1 and 680-1 is a lubricant designed to meet the many challenges faced by wind turbines in tough environmental conditions – conditions where temperature and humidity can’t be controlled, and where hard-to-reach locations result in long re-lubrication intervals.
Active protection with MFT-PD technology
Conventional lubricants use sacrificial additives that get used up and need to be replenished. So even though they protect equipment, there’s still wear – and breakdowns still happen.
Castrol’s new wind-turbine grease, Castrol Tribol GR SW 460-1 and 680-1, takes a completely different approach: it uses MicrofluxTrans Plastic Deformation technology (MFT PD). This actively smoothens the surface, without depositing or removing material.
That means less pressure, less friction and less wear. Because MFT PD is non-sacrificial and needs replacing less frequently, re-lubrication intervals can be longer. The result is not only increased protection and lower maintenance, but lower energy and lubricant costs, too.
Surface engineering
Castrol Tribol GR SW 460-1 and 680-1 with MFT PD technology creates a protective layer on metal surfaces to reduce micro pitting and wear, and potentially prolong bearing life.
Tribol® delivers adaptive protection for increased reliability
You rely on your manufacturing machinery in order to stay competitive, so its efficiency, reliability and longevity are all essential to business success. Yet with today's plants employing more complex machinery than ever, the challenge of keeping every chain, bearing, valve, conveyor, compressor, crane and hydraulic system effectively lubricated is overwhelming.
Up to 60% of mechanical failures are lubricant-related. That's why Castrol® Tribol has been specially formulated to help increase the operational life of equipment by adapting to even the most difficult operating environments.
Adaptive machinery lubrication means equipment reliability
Castrol® Tribol is an advanced industrial grease range formulated with Microflux Trans Plastic Deformation (MFT-PD) technology. This means that its active molecules can adapt to the differing needs of multiple operating conditions.
MFT-PD works by creating a protective film before friction occurs, which then actively diffuses into exposed metal surfaces under extreme conditions of pressure, vibration and shock, creating a micro-smoothing layer for optimal wear protection.
In doing so, Tribol delivers reduced maintenance costs, productivity improvements and lower operating temperatures: all of which contribute to increased reliability and lower cost of ownership.
Castrol Tribol SWP 460-1
Castrol Tribol GR SW 460-1 is a lubricant designed to meet the many challenges faced by wind turbines in tough environmental conditions – conditions where temperature and humidity can’t be controlled, and where hard-to-reach locations result in long re-lubrication intervals.
