MOTORCYCLE SPECIALITY PRODUCTS

Castrol POWER1 A747 is a low ash, part synthetic racing lubricant specially formulated for use in multi-cylinder, watercooled two-stroke engines fitted to road racing machines, where combustion chamber deposit control is essential. It also contains special additives to prevent throttle slide sticking in wet weather conditions and may be used at fuel/oil ratios up to 40:1.

Castrol POWER1 R40 is a castor-based lubricant containing specially prepared additives to prevent rapid deterioration through oxidation. Its superior oiliness over mineral oils, imparted by the chemical structure of its components, gives it a great affinity for hot surfaces and provides excellent load-carrying properties which is an important consideration with highly stressed engines running at peak revolutions.

Castrol POWER1 XR 77 is the ultimate pre-mix racing 2-stroke engine oil based on fully synthetic technology.

Castrol XR 44 is designed for four stroke supersport motorcycle engines. Engineered with unique Castrol motorsport formulation technology to deliver no compromise engine performance, XR44 can allow increase in power output not achievable by any motorcycle engine oil for road use

Castrol Chain Lube Racing is a spray lubricant developed and tested for high performance and racing applications.

 

It is suitable for use on sealed and unsealed chains fitted on both on- and off-road bikes.

Castrol Motorcycle Parts Cleaner is a specially formulated spray developed to clean motorcycle metal parts.
Castrol Motorcycle Parts Cleaner is used for degreasing and cleaning engine components, brakes, carburettors, spark plugs, electrical switches, metallic surfaces.
It also provides effective cleaning of motorcycle chains, improving significantly the adhesion of motorcycle chain lubricants to reduce fling and without damaging O-Rings.

Castrol Chain Spray O-R is a white, fully synthetic chain lubricant for motorcycle chains with O and X rings. It provides protection against corrosion and aggressive environmental influences and it reduces frictional properties to maximize power output and wear protection. 

Castrol DWF is high quality penetrating and de-watering fluid designed for use by the motorist and in the home or workshop. Available in aerosol packs this fluid displaces moisture, cleans, protects and lubricates all metals. The superior creep characteristics of Castrol DWF ensures effective penetration of corroded parts to allow for easy extraction, ideal for use on automotive exhaust systems, wheel nuts and suspension units.

Castrol Foam Air Filter Oil has been developed to ensure excellent performance for motorcycle filters. Castrol Foam Air Filter Oil has been tested in both controlled field conditions and bench test procedures according to BSI 1701 (ISO 5011).

Castrol Greentec Bike Cleaner is a concentrate cleaning detergent developed and tested specifically for modern motorbikes. Greentec Bike Cleaner has been developed in order to ensure fast and effective cleaning against the most resistant dirt, along with superior compatibility with a wide range of materials including metals and light alloys, plastics, rubbers and painted surfaces.

Castrol Silicon Spray is a silicone-based lubricant spray. It is ideal as a universal care product for the protection and cleaning of all plastic and rubber parts.

Castrol Fork Oil 10W is an advanced mineral based suspension fluid designed to provide the optimum damping performance in all on and off road suspensions. Its highly refined basestock and naturally high viscosity index will provide superior anti-fade damping performance over a wide temperature range. Castrol Fork Oil allows air release and anti-fade performance under the most arduous conditions such as found in racing. At low and high speeds there is a minimum suspension unit "stiction" with good operation of suspension units under a wide range of operating conditions.

Castrol Fork Oil 15W is an advanced mineral based suspension fluid designed to provide the optimum damping performance in all on and off road suspensions. Its highly refined basestock and naturally high viscosity index will provide superior anti-fade damping performance over a wide temperature range.

Castrol Fork Oil 20W is an advanced mineral based suspension fluid designed to provide superior damping performance in all on and off road suspensions.

Castrol Fork Oil Synthetic 5W is a fully synthetic suspension fluid designed to provide the ultimate damping performance in all on and off road suspensions.

Castrol MTX 10W-40 is a mineral multigrade motorcycle transmission oil designed for the latest generation of on and off road 2 and 4 stroke motorcycles.

 

Specifications

 

• API SG

Castrol MTX Full Synthetic 75W-140 is a full synthetic transmission lubricant for motorbikes with a separate oil sump for the gearbox.

 

Specifications

 

• API GL-5

Specifications

 

• API GL-5
• MAN 342 Typ S1
• Scania STO 1:0
• ZF TE-ML 05A,12B,17B,19C,21A
• BMW (Non LS Rear Axles)

Specifications

 

• API GL-5
• Scania STO 1:0, Scania STO 2:0A

Castrol Brake Fluid DOT 4 is a synthetic brake fluid comprising of glycols and borate esters to achieve a higher boiling point and wet boiling point.

 

Specifications

 

• JIS K2233, SAE J1703, SAE J1704, ISO 4925 Class 4, FWVSS DOT 4

Castrol React Performance DOT 4 is a high boiling synthetic brake fluid. It is formulated from mixed polyalkylene glycol ethers and borate ester together with other high performance additives and inhibitors which give ultimate system protection against the effects of corrosion and high temperature vapour lock.

 

Specifications

 

• FMVSS 116 DOT 4, ISO 4925 Class 4, JIS K2233, SAE J 1703, SAE J1704

Castrol React SRF Racing is a high performance brake fluid of special value in competitive motor sport where extreme braking conditions are encountered. Castrol React SRF Racing has an exceptionally high dry boiling point making it ideal for use under arduous braking conditions such as racing or rallying.

 

Specifications

 

• FMVSS 116 DOT 3, FWVSS 116 DOT 4, ISO 4925 (Class 4), SAE J1703, JIS K2233 (Class 4)

Castrol Motorcycle Coolant is a pre-diluted ethylene glycol based, fully formulated, heat transfer fluid. Developed to meet the requirements of all water-cooled motorcycles and scooters.

 

Specifications

 

• FMVSS 116 DOT 3, FWVSS 116 DOT 4
• ISO 4925 (Class 4)
• SAE J1703
• JIS K2233 (Class 4)